Care for Your Magic

1. Dispense a small amount onto a cleansing brush.
2. Gently work the shampoo through the lash line.
3. Rinse the lashes completely with clean water.
4. Pat dry and fan until the lashes are fully dry.

Use before every full set and fill. Clients should cleanse their extensions regularly to help prevent oil, makeup and debris from collecting around the lash line.

Keep the bottle tightly closed and store it in a clean, dry location away from direct heat and sunlight.

1. Shake the adhesive thoroughly before use.
2. Place a fresh adhesive drop on your preferred surface.
3. Dip only the base of the extension into the adhesive.
4. Attach it to one properly isolated natural lash.

Work between 64–80°F and 35–60% humidity. Replace your adhesive drop whenever it becomes stringy, tacky or begins behaving differently during the service.

Wipe the nozzle after dispensing and close the bottle immediately. Store it upright in an airtight container according to the instructions on its label.

1. Complete the lash application.
2. Allow the adhesive to cure as directed.
3. Place a small amount on a micro applicator.
4. Apply carefully to the adhesive bonding points.

Apply only a small and controlled amount near the bonded area. Avoid coating or oversaturating the lash extensions.

Close the product securely after every use. Store it in a clean and dry location away from direct sunlight.

1. Complete the lash service.
2. Apply a thin and even amount as directed.
3. Concentrate the product near the bonded area.
4. Allow it to dry without oversaturating the lashes.

Apply sparingly and provide the client with the proper cleansing and aftercare instructions for maintaining the set.

Close the product securely after each use and store it in a clean, dry location at room temperature.

1. Select the curl and length needed for your lash map.
2. Carefully remove the strip from the lash tray.
3. Create or pick up fans using your preferred technique.
4. Apply to one properly isolated natural lash.

Plan the complete lash map before application. Select lengths and weights that are appropriate for the condition of the client’s natural lashes.

Keep the tray closed between clients and store it flat in a clean, dry drawer away from adhesive fumes and moisture.

1. Create the base map for the lash set.
2. Mark the placement of every spike.
3. Remove each spike carefully to preserve its shape.
4. Apply to one properly isolated natural lash.

Keep the spike spacing intentional. Choose safe lengths based on the health and strength of the client’s natural lashes.

Keep the tray clean, dry and closed when it is not being used. Avoid touching or crushing the lash fibers.

1. Apply extensions using THAT Girl Adhesive.
2. Finish the bonding points with Hold Me Pretty.
3. Apply Stay Pretty Sealant as directed.
4. Give the client proper aftercare instructions.

Follow the individual directions for every product. Maintain the recommended temperature and humidity for THAT Girl Adhesive throughout the service.

Store every item according to its individual label. Keep the bottles securely closed and away from heat, moisture and direct sunlight.